Emerson Unidrive M400 User Manual page 95

Safety Product Mechanical
information information installation
VM_SPEED_FREQ_USER_REFS
Units Hz
Open-loop: -550.00 to 0.00
Range of [MIN]
RFC-A: -550.00 to 0.00
Open-loop: 0.00 to 550.00
Range of [MAX]
RFC-A: 0.00 to 550.00
VM_SPEED_FREQ_USER_REFS[MAX] = VM_SPEED_FREQ_REF[MAX]
Definition
If the second motor map is selected (Pr 11.045 = 1) Pr 21.002 is used instead of Pr 01.007.
VM_STD_UNDER_VOLTS
Units V
Range of [MIN] 0 to 1150
Range of [MAX] 0 to 1150
VM_STD_UNDER_VOLTS[MAX] = VM_DC_VOLTAGE_SET
Definition
VM_STD_UNDER_VOLTS[MIN] is voltage rating dependent. See Table 11-4
VM_SUPPLY_LOSS_LEVEL
Units V
Open-loop: 0 to 1150
Range of [MIN]
RFC-A: 0 to 1150
Open-loop: 0 to 1150
Range of [MAX]
RFC-A: 0 to 1150
VM_SUPPLY_LOSS_LEVEL[MAX] = VM_DC_VOLTAGE_SET[MAX]
Definition
VM_SUPPLY_LOSS_LEVEL[MIN] is drive voltage rating dependent. See Table 11-4
VM_TORQUE_CURRENT
Units %
Range of [MIN] -1000.0 to 0.0
Range of [MAX] 0.0 to 1000.0
Definition
VM_TORQUE_CURRENT[MIN] = -VM_TORQUE_CURRENT[MAX]
VM_TORQUE_CURRENT_UNIPOLAR
Units %
Range of [MIN] 0.0
Range of [MAX] 0.0 to 1000.0
VM_TORQUE_CURRENT_UNIPOLAR[MAX] = VM_TORQUE_CURRENT[MAX]
Definition
VM_TORQUE_CURRENT_UNIPOLAR[MIN] =0.0
Unidrive M400 User Guide
Issue Number: 2
Electrical Getting Basic
installation started parameters
Range applied to some Menu 1 reference parameters
Negative Reference Bipolar Reference
Clamp Enable (01.008) Enable (01.010)
0
0
1
1
Range applied the standard under-voltage threshold
Range applied to the supply loss threshold
Range applied to torque and torque producing current parameters
Select Motor 2 Parameters (11.045)
0
1
Unipolar version of VM_TORQUE_CURRENT
Running NV Media Card
Optimization
the motor Operation
VM_SPEED_FREQ_USER_REFS [MIN]
0 Pr 01.007
1 -VM_SPEED_FREQ_REF[MAX]
0 0.00
1 -VM_SPEED_FREQ_REF[MAX]
Onboard Advanced
Technical data Diagnostics
PLC parameters
VM_TORQUE_CURRENT [MAX]
VM_MOTOR1_CURRENT_LIMIT[MAX]
VM_MOTOR2_CURRENT_LIMIT[MAX]
UL listing
information
95