Emerson Unidrive M400 User Manual page 92

Safety Product Mechanical
information information installation
VM_DRIVE_CURRENT
Units A
Range of [MIN] -9999.99 to 0.00
Range of [MAX] 0.00 to 9999.99
VM_DRIVE_CURRENT[MAX] is equivalent to the full scale (over current trip level) for the drive and is given by Full
Scale Current Kc (11.061).
Definition
VM_DRIVE_CURRENT[MIN] = - VM_DRIVE_CURRENT[MAX]
VM_DRIVE_CURRENT_UNIPOLAR
Units A
Range of [MIN] 0.00
Range of [MAX] 0.00 to 9999.99
VM_DRIVE_CURRENT_UNIPOLAR[MAX] = VM_DRIVE_CURRENT[MAX]
Definition
VM_DRIVE_CURRENT_UNIPOLAR[MIN] = 0.00
VM_HIGH_DC_VOLTAGE
Units V
Range of [MIN] 0
Range of [MAX] 0 to 1500
VM_HIGH_DC_VOLTAGE[MAX] is the full scale d.c. link voltage feedback for the high d.c. link voltage measurement
which can measure the voltage if it goes above the normal full scale value. This level is drive voltage rating dependent.
Definition See Table 11-4
VM_HIGH_DC_VOLTAGE[MIN] = 0
VM_LOW_UNDER_VOLTS
Units V
Range of [MIN] 205
Range of [MAX] 205 to 1150
Definition
92
Electrical Getting Basic Running
installation started parameters the motor
Range applied to parameters showing current in A
Unipolar version of VM_DRIVE_CURRENT
Range applied to parameters showing high DC voltage
Range applied the low under-voltage threshold
NV Media Card Onboard
Optimization
Operation PLC
Advanced
Technical data Diagnostics
parameters
Unidrive M400 User Guide
Issue Number: 2
UL listing
information