4.
Remove the four precision screws (M2 x 4) to detach the EVF case assembly.
Precision screws
(M2 x 4)
Rear (cold) shoe
5.
Install the removed parts by reversing steps of removal.
2-13-5.
LCD Assembly
Preparation
1.
Remove the handle (upper) case assembly.(Refer to
2.
Remove the control panel assembly. (Refer to
Procedure
1.
Peel off the two tapes (BT).
2.
Disconnect the harnesses from the connectors CN402 and CN403 on the KSW-62 board.
PMW-160/PMW-150/PMW-EX260
Precision screws
(M2 x 4)
Harness
CN101
DR-670 board
"2-13-2. Control Switch Block
"2-13-3. MIC
Precision screws
EVF case assembly
(M2 x 4)
Precision screws
(M2 x 5)
Handle rear
cabinet assembly
(GZ92000)".)
Unit".)
2-28