5.
Remove the four precision screws (M2 x 4) to detach the EVF case assembly.
EVF harness sheet
Precision screws
(M2 x 4)
Rear (cold) shoe
6.
Install the removed parts by reversing steps of removal.
2-13-5.
LCD Assembly
Preparation
1.
Remove the handle (upper) case assembly.(Refer to
2.
Remove the control panel assembly. (Refer to
Procedure
1.
Peel off the tape (BT).
2.
Disconnect the harnesses from the connectors CN402 and CN403 on the KSW-62 board.
PMW-200/PMW-EX280
Precision screws
(M2 x 4)
Harness
CN101
DR-670 board
"2-13-2. Control Switch Block
"2-13-3. MIC
Precision screws
EVF case assembly
(M2 x 4)
Precision screws
(M2 x 5)
Handle rear
cabinet assembly
(GZ92000)".)
Unit".)
2-28