6.
Disconnect the RE-300 board from the connector CN801 on the AU-342 board.
RE-300 board
Precision screw
(M2 x 4)
7.
Remove the two precision screws (M2 x 4).
8.
Disconnect the RE-298 board from the connector CN102 on the RE-299 board.
Precision screws
(M2 x 4)
RE-298 board
9.
Remove the two (a) precision screws (M2 x 4).
10. Disconnect the RE-299 board from the connector CN800 on the AU-342 board.
11. Remove the three (b) precision screws (M2 x 4) to detach the bracket RE and the bracket (RE-299) from the RE-299
board.
RE-299 board
(b) Precision screws
(M2 x 4)
Bracket RE
(b) Precision screw
(M2 x 4)
AU-342 board
PMW-160/PMW-150/PMW-EX260
CN801
AU-342 board
CN102
RE-299 board
(a) Precision screws
(M2 x 4)
Bracket (RE-299)
CN800
2-47