3.
Remove the two claws to detach the DET-55 board.
Panel hinge cabinet T
Claws
Claws
DET-55 board
CN100
Harness
Panel hinge cabinet B
4.
Install the removed parts by reversing steps of removal.
2-13-7.
LCD Panel
Preparation
1.
Remove the handle (upper) case assembly. (Refer to
2.
Remove the control panel assembly. (Refer to
3.
Remove the LCD assembly. (Refer to
Procedure
1.
Remove the two precision screws (M2 x 5) and the two claws to detach the LCD cabinet.
2.
Peel off the tape 50 and the LCD conductive tape.
3.
Remove the main gasket (H).
4.
Remove the two precision screws (M2 x 4).
PMW-160/PMW-150/PMW-EX260
Precision screws (M2 x 5)
"2-13-2. Control Switch Block
"2-13-3. MIC
Unit".)
"2-13-5. LCD
Assembly".)
(GZ92000)".)
2-30