Inch Lcd Assembly - Sony PMW-EX1 Service Manual

2-2-26. 3.5-inch LCD Assembly

1. Refer to Sections from 2-2-3 to 2-2-5 and
disassemble the unit up to "Handle Assem-
bly" removal.
2. Turn the LCD block in the direction of arrow
"A".
3. Remove the two screws and disengage the
two claws, and remove the LCD cabinet in
the direction of arrow "B".
4. Disconnect the harness from the IF-1072
board.
5. Remove the four screws and the LCD
packing, and remove the 3.5-inch LCD
assembly.
n
The coaxial cable with connector uses fine
pitch coaxial cables. Be careful when arrang-
ing the cable. When disconnecting the coaxial
cable with connector, do not attempt to
remove by pulling the cable. Be sure to hold
the connector to remove.
6. Reinstall the 3.5-inch LCD assembly by
reversing the steps of removal.
2-24
P2 lock ace
2 x 4
A
Connector
(IF-1072 board)
LCD packing
LCD bezel
LCD cabinet
Two claws
B
LCD block
3.5-inch LCD assembly
P2 lock ace
2 x 3
PMW-EX1