Sony PMW-160 Service Manual page 85

ID Diagnosis
0x0A Communication test of camera signal
processor IC
Note
When an error is detected in the item, it indicates a possible error in the hardware.
Item2 (Display block diagnosis)
The display block diagnosis tests the following contents.
ID Diagnosis
0x01 Communication signal line test of
COPRO (SAD)
0x02 Communication signal line test of
LCD
Item3 (Media block diagnosis)
The media block diagnosis tests the following contents. An error value of "-6" is displayed in some cases with any ID
other than the following IDs, but this is not a problem.
Be sure to turn off the power after Item3 has been executed.
ID Intended device
0x06 USB Device
0x08 USB Device
0x09 i.LINK
0x0A i.LINK
0x0B USB Host
0x0D USB Host
0x11 TK-1(SlotA)
0x13 TK-1(SlotB)
0x14 PIFC
0x15 SPA
0x12 Torino
0x20 NOR-FlashROM
0x21 ExpressCard
0x22 (SlotA)
PMW-160/PMW-150/PMW-EX260
Error value
-5: Camera signal processor IC Read/
Write NG
Error value
-1: Connection error
-1: Connection error
Diagnosis Error value
Register Read/Write Refer to "Details of di-
agnosis"
Read/Write Non-installation "-6" is
always returned.
Register Read/Write Refer to "Details of di-
agnosis"
Read/Write Non-installation "-6" is
always returned.
Register Read/Write Refer to "Details of di-
agnosis"
Read/Write Non-installation "-6" is
always returned.
Data Read/Write Non-installation "-6" is
always returned.
Data Read/Write Non-installation "-6" is
always returned.
POWSW Refer to "Details of di-
agnosis"
POWSW Refer to "Details of di-
agnosis"
Data Read/Write Refer to "Details of di-
agnosis"
NOR-Flash ROM data Refer to "Details of di-
matching check agnosis"
ExpressCard power Non-installation "-6" is
switch ON/OFF control always returned.
ExpressCard overcur- Non-installation "-6" is
rent detection always returned.
Type1/2 Note
1 ,2 —
Type1/2 Note
1, 2 —
1, 2 —
Type1/2 Note
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
1 Startup must be com-
pleted
Continued
3-7