2.
Remove the two precision screws (M2 x 5) to detach the control panel assembly.
Precision screws
(M2 x 5)
Hinge (front) cover assembly
3.
Remove the shoe spring.
4.
Remove the four precision screws (M2 x 6) to detach the accessory shoe.
5.
Remove the precision screw (M2 x 5) to detach the MIC cabinet assembly.
Precision screws
(M2 x 6)
Shoe spring
MIC cabinet assembly
6.
Remove the two tapping screws (2 x 5) to detach the MIC case.
PMW-160/PMW-150/PMW-EX260
Control panel assembly
Accessory shoe
Precision screw
(M2 x 5)
Precision screws
(M2 x 5)
2-26