2-5-3.
IO-254 Board
Preparation
1.
Remove the battery lid. (Refer to
2.
Remove the bottom cover. (Refer to
3.
Remove the outside panel assembly. (Refer to
Procedure
1.
Remove the two screws to detach the USB ground plate and the IO-254 board.
2.
Install the removed parts by reversing steps of removal.
PMW-160/PMW-150/PMW-EX260
"2-2. Lithium
Battery".)
"2-3. Bottom Cover and Tripod
"2-5. Outside
Panel".)
IO-254 board
Washer".)
USB ground plate
Tapping screws
(2 x 5)
2-11