Sxs Slot; Sxs Slot Assembly - Sony PMW-160 Service Manual

2-7.

SxS Slot

2-7-1.

SxS Slot Assembly

Item to be prepared
• Tape50 (Part No. : 3-878-657-01) x 1
Preparation
1. Remove the battery lid. (Refer to
2. Remove the bottom cover. (Refer to
3. Remove the inside panel assembly. (Refer to
4. Remove the outside panel assembly. (Refer to
5. Remove the top panel assembly. (Refer to
Procedure
1. Peel off the cable protection tape (Tape50).
2. Disconnect the flexible board from the connector CN103 on the SWC-54 board.
3. Disconnect the fine-wire coaxial cable from the connector CN300 on the SWC-54 board.
4. Disconnect the harness from the connector CN104 on the SWC-54 board.
5. Disconnect the fine-wire coaxial cable from the connector CN100 on the EC-75 board.
6. Remove the four precision screws.
7. Disconnect the flexible board from the connector CN103 on the AU-342 board.
CN103
(AU-342 board)
CN103
Flexible board
(SWC-54 board)
8. Install the removed parts by reversing steps of removal.
PMW-160/PMW-150/PMW-EX260
"2-2. Lithium Battery".)
"2-3. Bottom Cover and Tripod
"2-4-1. Inside Panel
"2-5-1. Outside Panel
"2-6. Top Panel Assembly".)
Bottom side
Fine-wire coaxial cables
Precision screws (M2 x 4)
Harness
Washer".)
Assembly".)
Assembly".)
Cable protection tape
(tape 50)
CN100
(EC-75 board)
Precision screws
(M2 x 4)
CN300
(SWC-54 board)
CN104
(SWC-54 board)
Flexible board
2-13