Cleaning Instructions; Handling Notes; Moisture And Condensation Notes - IONODES ION-R200 User Manual

2 Cleaning Instructions


Unplug this product from the wall outlet before cleaning.

Use a soft dry cloth for cleaning.

For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a
dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as
they may damage the surface of the product.

3 Handling Notes

When shipping the product, the original shipping carton and packing materials should to be
used. For maximum protection, repack the unit as it was originally packed at our factory.
Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic
products in contact with the product for long periods of time. They will leave marks on the
surface finish.

4 Moisture and Condensation Notes

Moisture condensation will damage the product. Read the following notes carefully.
Moisture condensation occurs during the following cases:

Transferring the product directly from a cold place to a warm place.

Using the product in a room where you just turned on the heater, or a place where the
cold wind from an air conditioning unit directly hits the unit.

In the summer, when moving the product to a hot and humid place after leaving an air
conditioned space.

Using the product in a humid place.
Warning: Do not use the product when moisture or condensation may occur. If the product is
used in such an environment, it may damage discs and internal parts.
– User manual
ION-R200
Page 6 of 49