8 Powering the ION-R200 for the first time
Before you can use the ION-R200, you need to connect the following cables:
Display(s): You can connect one display using the HDMI connector and/or one display
using the Mini DisplayPort connector.
Ethernet network
Keyboard and mouse (optional)
Power
Connecting a keyboard and mouse to the ION-R200 allows you to configure the ION-R200
locally and for this reason are strongly recommended. If you plan on configuring the device
remotely, then the keyboard and mouse are optional.
Once all the required cabling is connected, press the POWER ON / OFF button on the top panel
of the ION-R200. After a few seconds, the image below appears on all connected displays:
ION-R200 – User manual
Page 13 of 49
Need help?
Do you have a question about the ION-R200 and is the answer not in the manual?