IONODES ION-R200 User Manual page 42

Note: If the ION-R200 is connected to two displays and you disconnect Display Output 1,
the other display automatically becomes Display Output 1. Display Output 2 is then
considered disconnected. A common mistake is to try to configure a disconnected
output.
Use the Identify feature to make sure you are configuring the right display.
If you disconnect a display, the ION-R200 remembers the selected output resolution in case the
display was disconnected by mistake. If you reconnect the same display, the output resolution
remains unchanged. If you connect a different display in its place, the new display may not
support the same set of possible output resolutions.
automatically reverts to Best Available to prevent any compatibility issues with the new
connected display.
– User manual
ION-R200
In that case, the output resolution
Page 42 of 49