Setting Up The Initial Network Configuration Locally - IONODES ION-R200 User Manual

– User manual
ION-R200
If computers and cameras on your network are not configured in APIPA mode, the ION-R200 will
not be able to communicate with them while in APIPA mode. In such a case, the network
configuration of the ION-R200 must be set manually.
When the network configuration is set manually, the ION-R200 skips all the steps above and
always uses the user-provided configuration. It is then the responsibility of the user to ensure
that the network configuration in the ION-R200 is compatible with the computers and cameras
on the network.

9.2 Setting Up the Initial Network Configuration Locally

The configuration of the ION-R200 can be accessed on the device itself by switching to the
configuration view.
Page 16 of 49