Displaying A Data Source - IONODES ION-R200 User Manual


Connection attempt refused by remote.
The connection to the camera was established, but the camera refused the
username/password provided.

Connection established, but unable to start video stream.
The connection to the camera was established, but the video stream could not be
started. The connection URI may not point to a valid video stream in the camera. This
can also occur if the camera has reached a connection or streaming limit due to other
third-party connections.

Invalid connection URI or internal error, connection attempt impossible.
The connection URI is malformed or incomplete.

9.7.2 Displaying a Data Source

Now that we have configured an RTSP video data source, the next step is to display it. In the
Configuration page, select the Video Out tab, then the Views & Tiles sub-tab.
Views determine how data sources are grouped and displayed. For example, by default each
view displays up to 4 data sources in a 2x2 layout. How to configure views will be discussed in
full details in section 9.9. For now, scroll down to the Tile Selection section. Each tile is
identified by its position in the currently selected layout.
ION-R200 – User manual
Page 31 of 49