Setting Up The Ntp Time Server - IONODES ION-R200 User Manual

ION-R200 – User manual
Click the Save button to apply the changes.
Note: Changing the time zone requires the device to be rebooted before the change takes
effect.

9.5.1 Setting Up the NTP time server

Some networks use a time server, also named NTP time server (Network Time Protocol). The
role of a time server is to synchronize the time for all devices on the network. The ION-R200
can be configured to use such a time server to synchronize its internal clock.
In the Configuration page, select the Network tab and scroll down to the NTP Configuration
section. Set the proper NTP server address under the NTP Configuration header. Click the
Save button to apply the changes.
If the device is configured in DHCP mode and the DHCP server is set up to provide the address
of the NTP time server, you can check Get NTP Configuration From DHCP. Click the Save
button to apply the changes.
Page 25 of 49