Setting Up The Initial Network Configuration Remotely - IONODES ION-R200 User Manual

The device is now ready to communicate with computers and cameras on your network.

9.3 Setting Up the Initial Network Configuration Remotely

Initial device network configuration can also be done via the ION Configuration Tool (ICT), a tool
provided by IONODES and that can be found on the IONODES web site at www.ionodes.com.
The ICT plays several roles:
Discovery of all ION-R200 and other IONODES devices on the network
1.
Remote configuration of the IP address and subnet mask
2.
Applying batch firmware upgrade of all common IONODES devices
3.
Accessing a device's web based management interface
4.
Once your device is installed on your network and powered up, launch the ICT from any
computer located on the same network as the device.
The ICT supports 2 methods for discovering a device on the network. The first method doesn't
require any configuration and uses the Bonjour discovery protocol. In order to be able to
discover a device via Bonjour, the network must support multicast IP.
ION-R200 – User manual
Page 19 of 49