Removal Of The Cable Passage Plate; Hmi Installation At The Cabinet Door Or Command Panel (Remote Hmi) - WEG CFW-11 User Manual

Installation and Connection

3.1.7 Removal of the Cable Passage Plate

When it is not necessary neither IP20 nor Nema1 protection degree, the cable passage plate may be removed
in order to make the inverter electric installation easier. Remove the 4 M4 screws, according to the procedure
presented in the figure 3.9.
1
3

3.1.8 HMI Installation at the Cabinet Door or Command Panel (Remote HMI)

Figure 3.10 - Data for the HMI installation at the cabinet door or command panel – mm [in]
The keypad frame accessory can also be used to fix the HMI, as mentioned in the table 7.2.
3-8
Figure 3.9 - Removal of the cable passage plate
65.0 [2.56]
2
28.5 [1.12]
23.5 [0.93]
35.0 [1.38]
3
∅4.0 [0.16] (3X)