Service And Maintenance; Calibration; Cleaning; Firmware Updates - Siemens SENTRON PAC4200 Manual

Service and maintenance

10.1

Calibration

The device has been calibrated by the manufacturer before shipping. Recalibration is not
required provided the environmental conditions are maintained.
10.2

Cleaning

Clean the display and the keypad periodically. Use a dry cloth for this.
CAUTION
Damage due to detergents
Detergents can damage the device. Do not use detergents.
10.3

Firmware updates

SENTRON PAC4200 supports firmware updates.
Use the SENTRON powerconfig software, Version V2.0 or higher, to install all updates. For
update instructions, please see the related documentation.
The update function is password protected.
10.4

Replacing the battery

The battery of the SENTRON PAC4200 must be periodically replaced.
Note
No battery indicator
The SENTRON PAC4200 has no function for determining the charging status of the battery.
Service life of the battery
Refer to the information about the service life of the battery in the chapter "Technical
specifications".
SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01
10
147