Siemens SENTRON PAC4200 Manual page 99

Navigation through the views
Navigation through the measured variables, menus and device settings is assigned
throughout to the function keys F1 and F4:
● F1
display of the menu.
● F4
● F4
● F4
The figure below shows the navigation paths. The display of the measured variables is the
starting point and end point of the navigation. Repeated pressing of F1 returns you to the
display of the measured variables.
Please note that additional functions are assigned to F4.
F4
If no editing is intended, the key closes the display and returns to the menu selection.
F4
SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01
: Cancels the last operator action. Returns from display of the device settings to
: Calls the main menu.
: Calls the selected menu entry.
: Opens edit mode of the device setting.
: Permanently saves the last set value and returns from edit mode to display mode.
: Is an ON/OFF switch.
Operator control
8.1 Device interface
99