Siemens SENTRON PAC4200 Manual page 53

Event
LIMIT LOG. OP=1
TARIFF
STATUS DI
STATUS DO
PULSE FREQ
TIME
FACT. DEFAULTS
BASIC PARAM
SETTING
COMM.
MAX/MIN=0
OP.HOURS=0
D ENERGY=0
EVENT=0
LOAD REC.=0
ENERGY C.=0
SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01
Event Standard
class warning
level
Operating Information
information
Operating Information
information
Operating Information
information
Operating Information
information
Operating Information
information
Operating Information
information
Operating Information
information
Control Warning
Control Warning
Control Information
Control Information
Control Information
Control Information
Control Information
Control Information
Control Information
Reason
The limit logic operation
complies with the limit
value xxxx.
Tariff change to ...
The digital input is activated.
DI address xx.xx
The digital output is activated.
DO address xx.xx
The pulse frequency is too high.
DO address xx.xx
The time was set on:
Slot xx interface
The factory defaults have been
set.
Slot xx interface
The basic configuration has
been changed.
Slot xx interface
The configuration has been
changed.
Slot xx interface
The communication
configuration has been changed.
Slot xx interface
The maximum / minimum values
have been reset.
Slot xx interface
The operating hours counter has
been reset.
Slot xx interface
The day energy counter has
been reset.
Slot xx interface
The event recordings have been
deleted.
Slot xx interface
The load profile recording has
been deleted.
Slot xx interface
All energy counters have been
reset.
Value 00000000
Slot xx interface
Description
3.16 Events
Remedy
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
53