Structure - Digital Inputs Status And Digital Outputs Status With The Function Codes 0X01 And 0X02; Table A- 3 Structure - Digital Inputs Status And Digital Outputs Status; A.3.2 Structure - Digital Inputs Status And Digital Outputs Status With The Function Codes 0X01 And 0X02 - Siemens SENTRON PAC4200 Manual

A.3.2 Structure - Digital inputs status and digital outputs status with the function codes
0x01 and 0x02
The following are available via MODBUS:
● "Digital Inputs Status"
● "Digital Outputs Status"
Input status and output status of the SENTRON PAC Power Monitoring Device
You can use the function codes 0x05 and 0x0F on the digital outputs in addition to the
function codes 0x01 and 0x02.
Table A- 3 Structure - Digital Inputs Status and Digital Outputs Status
Name
Digital Outputs Status
Digital Outputs Status
Digital Inputs Status
Digital Inputs Status
See also
Measured variables without a time stamp with the function codes 0x03 and 0x04 (Page 196)
SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01
Length Status
32 bits DO 0.0
32 bits DO 0.1
32 bits DI 0.0
32 bits DI 0.1
Byte Bit Bit mask
3 0 0x00000001
3 1 0x00000010
3 0 0x00000001
3 1 0x00000010
Appendix
A.3 MODBUS
Access
R
R
R
R
203