Operator Input Steps; Operator Input Steps In The Measured Variable Display - Siemens SENTRON PAC4200 Manual

Operator control

8.2 Operator input steps

8.2 Operator input steps
8.2.1

Operator input steps in the measured variable display

Selecting the measured variable
When displaying the instantaneous value, it is possible to switch to other measured
variables.
F2
F3
The order of the measured variables corresponds to the order in the main menu.
If the maximum or minimum value is displayed, F2
this case, switch first to the display of the instantaneous value.
Note: It is also possible to select the measured variable in the main menu.
Displaying instantaneous values, sliding window demand values, or maximum and minimum values
F1 switches the display on.
F1
F1
F1
F1
F1
F1
Reset the maximum or minimum value to the instantaneous value
F3
Switch between import and export
F1 switches between import and export of active energy and reactive energy.
F1
F1
Calling the "MAIN MENU"
F4
variable in the menu selection.
112
switches to the previous measured variable.
switches to the next measured variable.
: Display of the maximum value
: Display of the minimum value
: Display the sliding window demand
: Display the maximum value of the sliding window demand
: Display the minimum value of the sliding window demand
: Display of the instantaneous value
resets the last reached maximum/minimum value to the instantaneous value.
: Display export.
: Display of import.
calls the menu selection. The selection bar is at the last displayed measured
and F3 are not available. In
SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01