Display - Siemens SENTRON PAC4200 Manual

Parameterizing
9.2 Parameterizing the operator interface
COMMUNICATION
MAC-ADDR:
IP-ADDR.:
SUBNET:
GATEWAY:
PROTOCOL:
9.2.9

Display

Device settings for the SENTRON PAC4200 display.
Call: "SETTINGS > DISPLAY".
Figure 9-9
DISPLAY
CONTRAST
BACKLIGHT LEVEL
BACKLIGHT DIMMED
TIME UNTIL DIMMED
132
MAC address. Read only.
IP address.
Subnet mask.
Gateway address of a computer that can set up a connection
from the network defined in the field "SUBNET" to another
network (e.g. a router).
SEAbus TCP or MODBUS TCP
"DISPLAY" device setting
Contrast of the LC display.
Intensity of the backlighting of the LC display.
The value "0" switches the backlighting off.
Intensity of the backlighting of the LC display. Set by the
device after the display time until dimmed expires. See
"TIME UNTIL DIMMED" field
The value "0" switches the backlighting off.
Time after which the device switches the backlighting
from "BACKLIGHT LEVEL" to "BACKLIGHT DIMMED.
Range: 0 to 10.
Default: 5
Range: 0 to 3.
Default value: 3
Range: 0 to 3.
Default value: 1
Range: 0 to 99 min.
Default: 3 min.
Manual, 09/2008, A5E02316180B-01
SENTRON PAC4200