Siemens SENTRON PAC4200 Manual page 102

Operator control
8.1 Device interface
Selection bar
The selection bar indicates the menu entry that can be called with F4
F2
● If all entries of the displayed menu can fit on the display, the selection bar moves across
the stationary menu entries.
● If the menu list has more entries than can fit on the display, the display switches to scroll
mode. The selection bar remains stationary in the middle of the display. The menu list
rolls up and down "under" the bar.
Start of the list/end of the list
(1)
Figure 8-4
In all menus, the end of the list is looped back in a circle to the start of the list. F3
jumps from the end of the list to the start of the list. F2
the end of the list.
A separating line indicates the interface between the end of the list and the start of the list if
the menu contains more entries than can be shown on the display at one time.
Scroll bar of function key F1
The horizontal bar above function key F1 shows the multiple assignments of the function
key. The key assignment changes every time you press the key.
(1)
Figure 8-5
102
and F3 move the selection bar over the menu entries.
Separating line between the start of the list and end of the list
Start of the list/end of the list
Scroll bar of function key F1
Scroll bar
.
jumps from the start of the list to
SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01