Qlogic SANbox2-8c Installation Manual page 117

D
MFSEnable
MSEnable
NoClose
IOStreamGuard
VIEnable
CheckAlps
59042-03 A
Table B-9. Set Config Port Parameters (Continued)
Parameter
B – Command Line Interface
Set Config Command
Description
Multi-Frame Sequence bundling.
Prevents (True) or allows (False) the
interleaving of frames in a sequence.
The default is True. Enabling
MFSEnable disables LCFEnable and
VIEnable.
Management server enable. Enables
(True) or disables (False) management
server on this port. The default is True.
Loop circuit closure prevention. Enables
(True) or disables (False) the loop's
ability to remain in the open state
indefinitely. True reduces the amount of
arbitration on a loop when there is only
one device on the loop. The default is
False.
I/O Stream Guard. Enable (Enable) or
disables (Disable) the suppression of
RSCN messages. The default is
Disable.
Enables (True) or disables (False) VI
preference routing. The default is False.
Enabling VIEnable will disable
MFSEnable.
Enables (True) or disables (False) the
loop's ability to close more often.
Enable only for TL_Ports that are
having problems with a specific device.
The default is False.
B-31