Table of Contents
Advertisement
B – Command Line Interface
Passwd Command
Passwd Command
Changes a user account's password.
Authority
Admin to change another account's password; User to change your own.
Syntax
passwd [account_name]
Keywords
[account_name]
The user account name. You must open an admin session to change the
password for an account name other than your own. If you omit [account_name],
you will be prompted to change the password for the current account name.
Examples
The following is an example of the Passwd command:
SANbox2 (admin) #> passwd user2
Press 'q' and the ENTER key to abort this command.
account OLD password
account NEW password (4-20 chars)
please confirm account NEW password:
password has been changed.
B-18
:
:
D
59042-03 A
Advertisement
Table of Contents
