B – Command Line Interface
Date Command
Date Command
This command displays or sets the system date and time. To set the date and time
the information string must be provided in this format: MMDDhhmmCCYY. The
new date and time takes effect immediately.
Authority
Admin to change the date; User to display the date.
Syntax
date
[MMDDhhmmCCYY]
Keywords
[MMDDhhmmCCYY]
Specifies the date – this requires an admin session. If you omit
[MMDDhhmmCCYY], the current date is displayed – this is available with User
authority.
Examples
The following is an example of the Date command:
SANbox2 #> date
Mon Apr 07 07:51:24 2003
B-10
D
59042-03 A