Table of Contents
Advertisement
D
The following is an example of the Set Config Switch command:
SANbox2 #> admin start
SANbox2 (admin) #> config edit
SANbox2 (admin-config) #> set config switch
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
AdminState
BroadcastEnable
InbandEnabled
DefaultDomainID
DomainIDLock
SymbolicName
R_A_TOV
E_D_TOV
PrincipalPriority
ConfigDescription
FC-SW-2 Compliant
The following is an example of the Set Config Threshold command:
SANbox2 #> admin start
SANbox2
SANbox2 (admin-config) #> set config threshold
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
ThresholdMonitoringEnabled
CRCErrorsMonitoringEnabled
RisingTrigger
FallingTrigger
SampleWindow
DecodeErrorsMonitoringEnabled
RisingTrigger
FallingTrigger
59042-03 A
(1=Online, 2=Offline, 3=Diagnostics) [Online
(True / False)
(True / False)
(decimal value, 1-239)
(True / False)
(string, max=32 chars)
(decimal value, 100-100000 msec)
(decimal value, 10-20000 msec)
(decimal value, 1-255)
(string, max=32 chars)
(True / False)
(admin) #> config edit
(True / False)
(True / False)
(decimal value, 1-1000)
(decimal value, 0-1000)
(decimal value, 1-1000 sec) [10 ]
(True / False)
(decimal value, 1-1000)
(decimal value, 0-1000)
B – Command Line Interface
Set Config Command
]
[False
]
[False
]
[11
]
[True
]
[SANbox2 switch]
[10000
]
[2000
]
[254
]
[
]
[True
]
[False]
[True]
[25 ]
[1 ]
[True]
[200 ]
[0 ]
B-37
Advertisement
Table of Contents
