Qlogic SANbox2-8c Installation Manual page 145

D
The following is an example of the Show Version command:
SANbox2 #> show version
59042-03 A
*****************************************************
*
* Command Line Interface SHell
*
*****************************************************
SystemDescription QLogic SANbox2 FC Switch
Eth0NetworkAddress 10.20.11.192 (use 'set setup system' to update)
FCNetworkAddress 0.0.0.0 (use 'set setup system' to update)
MACAddress 00:c0:dd:00:71:ee
WorldWideName 10:00:00:c0:dd:00:71:ed
SymbolicName SB211.192
ActiveSWVersion V2.0.0.0-26
ActiveTimestamp day month date time year
DiagnosticsStatus Passed
SecurityEnabled True
B – Command Line Interface
*
(CLISH) *
*
Show Command
B-59