Table of Contents
Advertisement
B – Command Line Interface
Set Config Command
SymbolicPortName
ALFairness
DeviceScanEnabled
ForceOfflineRSCN
ARB_FF
InteropCredit
ExtCredit
FANEnable
LCFEnable
B-30
Table B-9. Set Config Port Parameters (Continued)
Parameter
Description
Descriptive name. The default is Port.
Arbitration loop fairness. Enables (True)
or disables (False) the switch's priority
to arbitrate on the loop. The default is
False.
Enables (True) or disables (False) the
scanning of the connected device for
FC-4 descriptor information during
login. The default is True.
Enables (False) or disables (True) the
immediate transmission of RSCN
messages when communication
between a port and its device is
interrupted. If enabled, the RSCN
message is queued for 200 ms. The
default is False. This parameter is
ignored if IOStreamGuard is enabled.
Send ARB_FF (True) instead of IDLEs
(False) on the loop. The default is
False.
Interoperability credit. The number of
buffer-to-buffer credits per port. 0
means the default (12) is unchanged.
Extended credits. The number of port
buffer credits that this port can acquire
from donor ports. The default is 0.
Fabric address notification. Enables
(True) or disables (False) the
communication of the FL_Port address,
port name, and node name to the
logged-in NL_Port. The default is True.
Link control frame preference routing.
Enables (True) or disables (False)
preferred routing of frames with R_CTL
= 1100 (Class 2 responses). The default
is False. Enabling LCFEnable will
disable MFSEnable.
D
59042-03 A
Advertisement
Table of Contents
