Activating Iorsf - Fujitsu S140 User Manual

Standard processing in SVP mode

6.5.2 Activating IORSF

The set IORSF must be activated with a IMPL:
Conditions
You must be in the AUXILIARY FRAME: IORSF CONTROL screen.
Press
Ê
Enter
Ê
The AUXILIARY FRAME: POWER STAND-BY/IMPL screen is displayed:
RA
Figure 48: AUXILIARY FRAME : POWER STAND-BY/IMPL screen
Enter
Ê
The following prompt appears:
***********************************
*
* ARE YOU SURE ? (ENTER Y OR N) N *
*
***********************************
!
Press
Ê
ENTER
U41161-J-Z126-1-76
to switch back to the AUXILIARY FRAME: MENU.
P3
in the
4 SELECTION=>
----- AUXILIARY FRAME: POWER STAND-BY/IMPL ----- E40L01G
FUNCTION=>
CL-0
in the
2 FUNCTION=>
The IMPL must not be executed during system operation!
If this instruction is not heeded, BS2000 will be terminated abruptly!
to execute the IMPL or
Y
.
field. Press
ENTER
*1 POWER STAND-BY
*2 IMPL
CPU-0 CHP-0
M
field to execute an IMPL. Then press
*
*
, to cancel the procedure. Confirm your entry with
N
.
RUN
M
FLAG CODE = D90557 W 00000V00
[]-[]00
ENTER
Activating IORSF
.
85