Switching The Skp And S140 On And Off Using Atop 3925 - Fujitsu S140 User Manual

Switching the SKP and S140 on and off using ATOP 3925

5.5 Switching the SKP and S140 on and off using ATOP 3925
Figure 13: Switching the SKP and S140 on and off using ATOP 3925
Together with the 3925 Multi-ATOP, the SKP supports the possibility of switching the S140
on automatically using the on/off facility.
In addition, the S140 must be configured to switch on and off automatically as part of the
starting and shutting down procedure for the SKP (see page 29).
The ATOP switches the SKP on via its remote switching interface. The SKP switches during
startup the S140 on. After the IMPL, the BS2000 system is started using the POWER ON
IPL function of the SVP or using the ATOP menu.
The BS2000 system can be operated both via the ATOP and manually by the operator.
To switch off the system, BS2000 must first of all be exited (ATOP/operator). The S140 is
switched off by the SKP when the SKP is switched off by the ATOP.
!
You will find information on operating and programming the ATOP in the ATOP operating
instructions enclosed.
32
ATOP
Please read the note on page 30.
Console
SKP
internal LAN
V.24
COM1
Remote operator terminal
S140
I/O channel
SVP
on/off facility
LAN
Switching on and off
U41161-J-Z126-1-76