Important Instructions; Manufacturer Instructions; Rfi Suppression - Fujitsu S140 User Manual

2 Important instructions

This chapter lists selected notes from the manufacturer and information on RFI
suppression.
You should pay particular attention to the safety instructions in section 2.3.

2.1 Manufacturer instructions

2.2 RFI suppression

!
The devices generate and emit high-frequency energy.
If the devices are installed and used other than as instructed in the manual, failures in the
devices or other electric systems may occur. If failures of this type occur it is the task of the
user to carry out measurements and implement measures to solve the problem. Only the
cables supplied with the system or recommended by Fujitsu Siemens Computers may be
used.
All other devices which are connected to the present product must be radio interference
suppressed in accordance with BMPT Order No. 1046/84 and Order No. 243/91 or EU
Directive 89/336/EEC. Products which satisfy this requirements are provided with an appro-
priate certificate by the manufacturer and bear the CE mark or the interference suppression
symbol.
U41161-J-Z126-1-76
This product complies with the EC guideline 89/336/EEC "Electronic Compati-
bility". The product bears the EC certificate.
WARNING: This is a class A equipment. This equipment may cause interference to
radio and television reception in a residential installation. If it does cause inter-
ference, the user may be requested to take appropriate corrective measures at his
or her own cost.
3