Activating And Terminating The Scsiselect Utility - Fujitsu PRIMERGY User Manual

3.2 Activating and terminating the SCSISelect Utility

I
Activation of the SCSISelect utility
1) While the following prompt is displayed at the SERVER bootup, press the [Ctrl]
2) As shown below, two options, Configure/View Host Adapter Settings and SCSI
3) Every time the [F5] key is pressed, the screen can be switched between
monochrome and white and colored screens. However, according to the model of
CRT display, this function may not available.
4) To select the option, move the cursor to the desired option by pressing the [↑] or
[↓] key, then press the [Enter] key.
5) Pressing the [Esc] key can restore to the previous screen at any time.
I
Termination of SCSISelect utility
1) Restore the menu screen and press the [Esc] key. A message "Exit Utility?" is
8
+ [A] key to activate the SCSISelect utility.
Adaptec AHA-2944 Ultra W BIOS v*.***
(c)1996 Adaptec, Inc.All Rights Reserved.
Press <Ctrl><A> for SCSISelect (TM) Utility!
Disk Utilities, are displayed on the first menu.
Adaptec AHA-2944 Ultra W SCSISelect (TM) Utility v*.**
Configure / View Host Adapter Settings
Note
When Configure/View Host Adapter Settings is selected, settings return to
the default value by pressing the [F6] key.
displayed. (See Step 2) of "Activating the SCSISelect utility" for the menu
screen.)
Options
SCSI Disk Utilities