Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fujitsu FUTRO S9011
Summary of Contents for Fujitsu FUTRO S9011
- Page 1 Thin Client Operating Manual FUJITSU Thin Client FUTRO S9011...
- Page 2 Thank you for buying an innovative product from Fujitsu. Latest information about our products, useful tips, updates etc. is available on our website: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: •...
- Page 4 Issued by / EU importer Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2022. All rights reserved. Publication Date 02/2022 Order No.: A26361-K3035-Z320-1-19, edition 3...
- Page 5 FUJITSU Thin Client FUTRO S9011 Operating Manual Your FUTRO... Ports and Operating Elements Important notes Getting started Operation System expansions and repairs Technical data Index...
- Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
-
Page 7: Table Of Contents
FUJITSU FUTRO S9011 thin client ........ - Page 8 Index ................. . 31 Fujitsu...
-
Page 9: Your Futro
Validity of the Reference Manual This reference manual applies to the following system with model name TCM1 for certification: • FUJITSU FUTRO S9011 thin client Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. -
Page 10: Ports And Operating Elements
(pre-installed) Microphone Port 3 = USB port 3.2 Gen 2 (USB Type-C) (see 7 = ON/OFF switch "USB port 3.2 Gen 2 (USB Type-C) 8 = SmartCard Reader (mainboard)", Page 4 = USB port 3.2 Gen 2 (USB Type-A) Fujitsu... -
Page 11: Rear View
5 = USB 2.0 ports (USB Type-A) 6 = USB port 3.2 Gen 2 (USB Type-C) (see "USB port 3.2 Gen 2 (USB Type-C) (mainboard)", Page The FUTRO S9011 has a Flex I/O with one of the following possible connection types: • HDMI •... -
Page 12: Security Functions
If you are using the VESA sub-adapter, first connect the Kensington Lock Cable to the Security Lock device and then mount your device on the VESA sub-adapter. You can find more information in the manual for your FUJITSU FUTRO S monitor carrier. When using the Security Lock device, opening of the casing is also prevented. - Page 13 ► Insert the USB covers in the USB ports on the front of the device and push the USB covers in firmly. ► Insert the USB covers in the USB ports on the rear side of the device and push the USB covers in firmly. Fujitsu...
- Page 14 Ports and Operating Elements In the BIOS Setup, under Advanced - USB Port Security, you can also deactivate the USB ports, in order to limit the use of USB devices. Fujitsu...
-
Page 15: Important Notes
Make sure that the rated current of the mains adapter is not higher than that of the power system to which you connect the mains adapter. ON/OFF switches do not disconnect the device from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the power socket. Fujitsu... -
Page 16: Transporting The Device
Ensure that no liquid enters the system. The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and the mouse. Fujitsu... -
Page 17: Energy Saving, Disposal And Recycling
"Fujitsu Responsible Business: Fujitsu EMEIA" • "Recycling Program: Fujitsu EMEIA" The following sections apply to the FUJITSU Thin Client FUTRO only: Information about the "Eco-design directive": Regulation 1275/2008, based on the EU Eco-design Directive (2009/125/EU), defines requirements for the power consumption of electrical and electronic domestic and office devices in stand-by and off mode. -
Page 18: Getting Started
If the device is to be built-in, adequate ventilation must be assured. The foot for the vertical operating position needs to be installed (see "Vertical operating position", Page 15). The feet for the horizonal operating position have been pre-installed (see "Horizontal operating position", Page 17). Fujitsu... -
Page 19: Vertical Operating Position
► Lay the device on its top (narrow side) as shown, on a stable, flat and clean surface. ► Place the foot on the housing (1). Make sure that you align the 2 latches (2) on the foot with the corresponding holes on the housing. ► Fix the foot with the screws (3). Fujitsu... - Page 20 Getting started ► Place the unit on the foot. ► If necessary, reconnect any cables that were previously disconnected. Fujitsu...
-
Page 21: Horizontal Operating Position
Getting started Horizontal operating position The feet for the horizonal operating position have been pre-installed. Horizontaloperatingposition Operatingposition,horizontal Base feet Fujitsu... - Page 22 Getting started ► Place the device on the feet. ► If necessary, reconnect any cables that were previously disconnected. Fujitsu...
-
Page 23: Connecting External Devices
► Follow the instructions contained in the monitor manual to prepare the monitor for operation (e.g. connecting cables). Monitor, ► Connect the data cable to the required monitor port on your device. ► Plug the monitor power cable into the grounded mains outlet. Fujitsu... -
Page 24: Connecting A Usb Mouse
The devices connected to the serial interface require drivers. Your operating system already includes many drivers. If the required drive is missing, install it. The latest drivers are usually available on the Internet or will be supplied on a data carrier. Fujitsu... -
Page 25: Connecting External Devices To The Usb Ports
Connecting Audio Devices Microphone Headphones Line-outdevices ► Connect the audio device to the combined headphone and microphone port. Connecting the device to the network (LAN) ► Connect the 10/100/1000 Base T network cable to the RJ45 LAN port. Fujitsu... -
Page 26: Connecting The Mains Adapter
► Connect the mains cable (1) to the mains adapter. ► Connect the mains adapter cable (2) to the DC jack (DC IN) of the device. ► Plug the mains cable (3) into a mains socket. Fujitsu... -
Page 27: Operation
Citrix and Microsoft clients as well as the optional VMware client. It has a user-friendly licence model, with the possibility of transferring licences to new devices. Updates for eLux® can be found on the Fujitsu support pages or on the Internet at "www.myelux.com". -
Page 28: Windows® 10 Iot Enterprise
The write protect filter is not enabled in the delivery state, to make it easier to adapt the thin client to your requirements. Fujitsu strongly advises that the write protect filter should be enabled during normal operation, because only then is the typical thin client high security of the device guaranteed. -
Page 29: Scout Enterprise Management Suite® - The Management Solution For Thin Clients
• Support of Wake-On-LAN and Remote Power On/Off Mirroring of desktops, encrypted and audit-proof • • Extensive diagnostic information For more information on Scout Enterprise, go to "http://www.unicon-software.com/produkte/scout-enterprise/". More information and manuals are available on the Internet at "http://www.unicon-software.com/udocs". Fujitsu... -
Page 30: Switching Off The Device
BIOS Setup will be started. Select one of the tabs to access other setting options in BIOS Setup. PXE system boot PXEsystem boot ► Switch the device on with the ON/OFF switch. ► When starting the system, press the key several times. The boot menu is displayed. ► Select the desired boot option. Fujitsu... -
Page 31: Bios Update
BIOS Update When should a BIOS update be performed? Fujitsu Technology Solutions makes new BIOS versions available to ensure compatibility with new operating systems, new software or new hardware. In addition, new BIOS functions can be integrated. A BIOS update should also always be performed if there is a problem that cannot be solved using new drivers or new software. -
Page 32: System Expansions And Repairs
Servicing Information on system expansions and repairs can be found on the Internet in the "System Expansions and Repairs" manual at "http://www.fujitsu.com/fts/support". Operations that are distinguished in the manual as Only For Service, such as repairs to the device, may only however be performed by authorised service technicians. -
Page 33: Technical Data
Technical data Technical data Technicaldata FUJITSU FUTRO S9011 thin client Electrical data Processor: AMD Ryzen R1606G, dual core 2.6 GHz (max. 3.5 GHz) Rated voltage: With AC adapter: 19 – 20 V With internal PSU: 100 – 240 V Max. rated current: With AC adapter: 3.42 A... -
Page 34: Ac Adapter
USB port 3.2 Gen 2 (USB Type-C) (Flex I/O ports) Electrical data Power delivery IN: 20 V, 3.25 A Power delivery OUT: 5 V, 3 A Data (R/W): Gen 2, 5 Gbps Video (Display): 3840x2160@60Hz Output limit: System PCIe interface allow assembly of max. 2 W add-in cards Fujitsu... - Page 35 PCIe slot 7 Flex I/O 7 Ports 6, 19 Power cable connection 22 Power-on indicator 6 Getting started 14 Preparing for operation 22 Property protection 8 Protection, property and data 8 Headphone jack 7 PXE system boot 26 Headphone port 6 Fujitsu...
- Page 36 20 Serial port 7, 19 USB port, Servicing 28 connecting devices 21 Side cover 15 USB ports 7 SmartCard reader indicator 6 System expansion 28 Vertical operating position 15 System unit, see Device 12 Technical data 29 Fujitsu...