Operating The Bs2000 Console - Fujitsu S140 User Manual

7 Operating the BS2000 console

Selecting the console window
At the operator terminal, you enter system operating mode by clicking the window
CONS0 #1<computer name> with the left mouse button.
System operation
When the BS2000 console window is opened, no input is permitted. If you attempt to make
an entry, you are prompted to release the window by entering the valid password. You do
this using the MENU function.
Press the
1
1 - Permit Input (On)
2 - Inhibit Input (Off)
3 - Change Password
4 - View Last Messages
5 - Programmable Function Keys
6 - KVP Administrative Functions
7 - Exit
Figure 53: Main KVP Function Menu
Use the keys
provided on the main KVP function menu.
Ê Select function 1 and press the
Enter the password for the cons0 user ID. Confirm your input by pressing the
Ê
key.
You can then enter BS2000 commands or respond to queries from the BS2000 system.
Your input is transferred to BS2000 when you press the
V7
U41161-J-Z126-1-76
key to display the main KVP function menu.
MENU
Main KVP Function Menu
, or the corresponding digits and
You will find further information on the functionality of the main KVP function menu
and on using special key functions in "BS2000 CONSOLE mode" in the "SINIX-
2000 V7.5/V8.0" [1] manual.
ENTER
key.
ENTER
to select and start the functions
key.
ENTER
ENTER
95