Operation; Switch The Device On; Switching Off The Device; Activating Power-Saving Mode - Fujitsu FUTRO S720 Operating Manual

Hide thumbs Also See for FUTRO S720:
Table of Contents

Advertisement

Operation

Switch the device on

► If necessary, switch the monitor on (see the operating manual for the monitor).
Device,
Monitor,
► Press the ON/OFF switch on the front of the device.
The power indicator lights up and the device starts.

Switching off the device

► Shut down the operating system in the proper way. In Windows: from the
Start menu select the Shut Down option.
Device,
Monitor,
► If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the device is switched off, it consumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the power socket.
► If necessary, switch the monitor off (see the operating manual for the monitor).

Activating power-saving mode

Due to customer requirements and requirements of the operating system, the "Wake-on-LAN"
(WoL) function is set by default. The WoL function increases the idle current slightly.
In order to meet the requirements of EU Directive "COMMISSION REGULATION
(EC) No 1275/2008 of 17 December 2008 implementing Directive 2005/32/EC", the
default WoL setting must be changed as follows:
► To start the BIOS Setup Utility after system boot, press function key
► In the Power sub-menu, select the Low Power Soft Off setting and switch it to enabled.
► To save the setting and exit the BIOS Setup Utility, press function key
After making this change, the system will achieve the lowest energy
saving mode during shut-down.

Open BIOS Setup

BIOS-Setup
► When the system starts, press the
BIOS Setup will be started. Select one of the tabs to access other setting options in BIOS Setup.

PXE system boot

PXEsystem boot
► Switch the device on with the ON/OFF switch.
Fujitsu
key (several times if necessary).
F2
Operation
.
F2
F4
.
25

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FUTRO S720 and is the answer not in the manual?

This manual is also suitable for:

Futro s920Esprimo a525-l

Table of Contents

Save PDF