Fitting The Image To A Fixed Copy Size - Xerox 8830 User Manual

Making copies (continued)

Fitting the image to a fixed copy size

The 8825/8830 DDS can automatically fit the scanned image onto a
predefined size of media.
1. Set the Media Selection Source to Auto. The Auto lamp illuminates.
This setting allows the 8825/8830 DDS to automatically select the
available media roll on which the width of the image fits the best.
2. Select the Type of media. The default setting is Bond.
3. Set the Output Format to Preset and select the desired page size. This
setting cuts the media to a previously defined length that the operator
chooses.
PRESET OUTPUT FORMAT
SELECT 8.5 X 11 ANSI A
4. Press the Next or Previous keys until the desired output size is
highlighted.
5. Press the Enter key to confirm your choice.
6. Set Reduction & Enlargement to Auto.
READY TO COPY
INSERT DOCUMENT
8.5 IN
11.0 IN
Menu Previous Next
AUTO
1
Enter Exit Mode
Media Selection
Source Type
Sheet
R3
Film
R2
Vellum/
R1 Tracing
Auto
Bond
Image Quality
Original
Type
Background
Suppression
Off
Mixed
Photo
Line
Auto
Output Format
Manual
Preset
Synchro
Reduction &
Enlargement
Copy
Auto
Manual
Preset
8825/8830 DDS User Guide/35