Building The Set - Xerox 8830 User Manual

Special features and making special copies
Making Collated Copies − Sets Build key
(continued)

Building the set

To build a collated set, press the Sets Build key. The associated indicator
lamp illuminates, and the SETS BUILD screen is displayed.
SETS BUILD
COLLATION: FORWARD
Previous Next
Menu
FORWARD prints the collated set in the order that the sheets were scanned.
REVERSE prints the set in the reverse order.
Press the Next or the Previous key to select FORWARD or REVERSE
collation. Press the Enter key to confirm the choice.
The READY TO BUILD SET screen is displayed.
Enter Exit Mode
Insert each document of the set, one at a time, into the Scanner, as
prompted by the display.
READY TO BUILD SET
INSERT DOCUMENT: 1
AUTO
100.0%
As the documents are scanned, the amount of
memory used is shown in the rectangular graphical display.
Note: the operator may select reduction/enlargement and copy quality
settings for each sheet prior to scanning that sheet.
8825/8830 DDS User Guide/48
MEMORY