Special features and making special copies
(continued)
Saving and recalling job data − Store/ Recall key
The parameters, image, and features associated with the last copy job run
are stored in memory and may be recalled and used again.
Note: in the "...SCAN" mode, this feature is not available.
Press the Store/ Recall key to recall and reuse the information from the last
copy job.
The operator may also recall the last job information, scan a new image, and
print that image using all of the recalled settings.
When the Store/ Recall key is pressed, the STORE/ RECALL screen is
displayed.
STORE/ RECALL
LAST JOB
JOB TEMPLATES
SAVE DEFAULT TEMPLATE
Recalling the last job
Press the Enter key to select LAST JOB.
The LAST JOB screen is displayed.
LAST JOB
RECALL LAST JOB
DELETE LAST JOB
Margin
Sets Build
Finisher
Store/
Recall
Mode
Printer
Interrupt
The screen then displays:
COPIER PARAMETERS AND IMAGES
FOR LAST JOB: RECALLED
PRESS ENTER TO CONTINUE
Press the Enter key to return to the "READY..." screen.
The operator may then use the settings as they have been recalled, or may
change one or more of them.
Sample
Transform
1
2
3
4
5
6
9
7
8
.
0
C/CA
Start
Stop
8825/8830 DDS User Guide/39