Xerox 8830 User Manual page 49

Special features and making special copies
Saving and recalling job data − Store/ Recall key
Storing Job Templates (continued)
The SAVE screen is displayed, showing the unused template locations.
Locations that actually contain a template already are not displayed.
Choose an unused location, and enter its location using the numeric keypad.
Press the Enter key to confirm the choice.
UNUSED TEMPLATES: 1 2 3 4 5 6 7 8 9
ENTER TEMPLATE NUMBER
The settings from the current copy job are saved at the location entered; and
a confirming message is displayed.
PARAMETERS
SAVED AS TEMPLATE 3
PRESS ENTER TO CONTINUE
SAVE
3
The operator may choose to replace the contents of a used location with the
current job settings information. If the operator chooses a location that
already contains information, the TEMPLATE IS IN USE screen is displayed.
Press the Enter key to overwrite the contents. Press the Exit key to cancel
the operation.
TEMPLATE IS IN USE:
PRESS ENTER TO OVERWRITE
8825/8830 DDS User Guide/41