For Jobs Arriving From The Scanner; For Jobs Arriving From Other Sources - Xerox 8830 User Manual

Job Accounting – Setup and Administration
Setting the job accounting mode (continued)
Job Accounting can be separately enforced for jobs that arrive from the
scanner and jobs that arrive from other sources. To enforce Job Accounting
for jobs arriving from the Scanner, enable Job Accounting from the DDS
User Interface. To enforce Job Accounting for jobs arriving from other
sources, enable Job Accounting from the Printer Control Panel.

For jobs arriving from the Scanner

To set the job accounting mode for jobs that arrive from the Scanner:
1. Press the Menu key on the DDS User Interface.
2. Press the Next key until SYSTEM ADMINISTRATION is selected. Press
the Enter key to confirm the choice.
3. Enter the system administration password, and press the Enter key.
4. Press the Next key until JOB ACCOUNTING is selected. Press the
Enter key to confirm the choice.
5. Press the Next key until ACCOUNTING MODE is selected. Press the
Enter key to confirm the choice.
6. Press the Next key to select the desired job accounting mode. Press
the Enter key to confirm the choice.

For jobs arriving from other sources

For complete details about administering remote print job accounting, please
refer to the 8825/8830 Job Accounting Administrator Guide.
8825/8830 DDS User Guide/97