Xerox 6030 User Manual page 99

Static Routing
ON
ROUTING TABLE
ADD
Dest. Address
123. 000. 000. 000
Router Address
123. 000. 000. 000
Serial Setup
PORT SETTING
SERIAL
SERIAL
Baud Rate
3.2 Communication Parameter Setup (Printer Control Panel, 6030/6050)
Downloaded From ManualsPrinter.com Manuals
*
1. Select [ON] for [Static Routing], and then
2. Select [ADD] for the [ROUTING TABLE],
3. Enter the destination address, and then
4. Enter the routing address, and then press
1
2
Adding items to the routing table
press the <Set> key.
Now press the < > key.
and then press the <
press the <Set> key.
After setting up the destination address,
move the cursor to the right-hand side
and press the < > key.
the <Set> key.
To return to the previous menu, move
the cursor to the left-hand side and
press the < > key.
Display [SERIAL] on the setup item
selection screen, and then press the <
key.
Select the item that is to be set up with the
use of the < > and < > keys, and then
press the < > key.
[Handshake], [Baud Rate], [Parity], [Data
Bit], [Stop Bit], [EOP Timeout], [Output
Response], and [Job Separation] will be
displayed in that order.
> key.
>
71