Xerox 6030 User Manual page 100

Baud Rate
300
Centronics (optional) Setup
PORT SETTING
CENTRO
CENTRO
DMA Timeout
DMA Timeout
005 sec
VPI (optional) Setup
PORT SETTING
VPI
VPI
Job Separation
72
Downloaded From ManualsPrinter.com Manuals
3
Select the parameters with the use of the
*
< > and < > keys, and then press the
<Set> key.
An asterisk [*] will display on the right side
of the parameters once they have been set.
1
Display [CENTRO] on the setup item
selection screen, and then press the <
key.
2
Select the item that is to be set up with the
use of the < > and < > keys, and then
press the <
[Ack Mode], [DMA Timeout], [EOP
Timeout], and [Job Separation] will display,
in that order.
3
Select the parameters with the use of the
*
< > and < > keys, and then press the
<Set> key.
An asterisk [*] will display on the right side
of the parameters once they have been set.
1
Display [VPI] on the setup item selection
screen, and then press the <
2
Select the item that is to be set up with the
use of the < > and < > keys, and then
press the <
[REPORT OFFLINE], [EOP Timeout], and
[Job Separation] will display, in that order.
> key.
> key.
> key.
Chapter 3 Printer Setup
>