Split Drawing - Xerox 6030 User Manual

Split Drawing

Fragment
length
Settings
134
Downloaded From ManualsPrinter.com Manuals
When an image exceeds 1,189mm in length, it can be split (fragmented) and
printed in sections. This function also enables you to add positioning marks on
each split section. A maximum of 30 such sections is possible.
The settings for Split Drawing are as follows.
Item
Split drawing Set to either [Do not split] or [Split].
mode The default setting is [Do not split].
Split length Sets the print length within a range of 1,189 to 3,000 mm.
The default settings is [1,189 mm].
Page number Determines whether or not a page number will be printed.
printing The page number will be printed in the format [present
page number:total number of pages].
The default setting is [Off].
Chapter 4 Logical Printer Setup and Operation (6030/6050 only)
Fragment
length
1/3
2/3
Description
3/3