Xerox 6030 User Manual page 176

End style
148
Downloaded From ManualsPrinter.com Manuals
Menu Item
Width Sets the line width in a range from 0 to 511, where a setting
of
1 = 0.0635 mm. The actual width of the line will be n
0.0635, with the line width set to n. The default setting is [2].
Color Sets the line color to [BLACK] or [WHITE].
The default setting is [BLACK].
End style Sets the end of the line to [SQUARE], [ROUND], [EXTEND],
or [TRIANGLE]. The default setting is [SQUARE].
Refer to the illustrations on the next page for more details.
Joint style Sets joint processing for lines to [UNJOINT], [BEVEL],
[MITER], [ROUND], [TRIANGLE], or [MITERED/BEVELED].
The default setting is [MITER].
Refer to the illustrations on the next page for more details.
Chapter 4 Logical Printer Setup and Operation (6030/6050 only)
Description
Lines may be printed in patches if the width is set to [1].
This setting is only valid for HP-GL and HP-GL/2 EA,
EP, ER, FP, RA, RR, and PE.
×