Xerox 6030 User Manual page 109

Job Recovery
OFF
3.6 System Parameter Setup (Printer Control Panel, 6030/6050)
Downloaded From ManualsPrinter.com Manuals
[Sleep Mode], [Attention Light], [Print
Density], [Job Recovery], and [Net Cont.
Time] will display, in that order.. Press the
< > key to select the item.
3
Select the parameters using the < > and
*
< > keys, and then press the <Set> key.
An asterisk [*] will display on the right side
of the value once it is set.
The changed parameters are saved
to the system when the <Set> key is
pressed. It is not necessary to save
each change individually.
81