Plot Area - Xerox 6030 User Manual

Plot Area

_
X direction
4.3 Logical Printer Print Settings
Downloaded From ManualsPrinter.com Manuals
Enables the print range (the plot area) to be specified based on the input image
information. The plot area can be set up so that the image prints in the center of
the media (Auto Layout) or is offset (Set Offset Value). If part of the image
overlaps the margin when offset is specified, it will be cut off.
Plot Area
+Y direction
+X direction
_
Y direction
Input image
Auto layout
_
Offset = ( X, +Y)
Output image
127